Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 42 subscribers
  • Views 2614 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

kein IPsec VPN nach Upgrade auf SFOS 20.0.1 MR-1-Build342

Uwe Bohnhoff

Hello,

all our Site-to-Site-VPN don't work again after upgrading from SFOS 20.0.0 GA-Build222 to SFOS 20.0.1 MR-1-Build342.

In the log we find: 

(unnamed) - Couldn't parse IKE message from ..

Also all outgoing remote IPSec don't work again after upgrading:

Child SA (Security Association) konnte nicht hergestellt werden.

Can anyone help?

Thanks

Uwe



This thread was automatically locked due to age.
Parents
  • 0

    Just to be sure: IKE parse means basically, there is no IPsec Packets arriving (Port500/4500). 

    Could you check the packet capture? 

    And please check, if the Device Access Accepts IPsec on WAN. 

    __________________________________________________________________________________________________________________

Reply
  • 0

    Just to be sure: IKE parse means basically, there is no IPsec Packets arriving (Port500/4500). 

    Could you check the packet capture? 

    And please check, if the Device Access Accepts IPsec on WAN. 

    __________________________________________________________________________________________________________________

Children
No Data
Unfiltered HTML