This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XGS2100 - VLAN gateways

Hello,
Please some help understanding the following scenario:

VLAN ID - 400
VLAN ID - 410

On the network with vlan ID 400 I can use the ip gateway from VLAN ID 410 and it works! Rules are applied correctly (from VLAN ID 400).
This happens in all the VLANS.

In any vlan, i can use the ip gateway of another vlan.

Can someone simulate for me if this is a normal behavior?
I'm not finding any error in the configuration.

Thank you

This thread was automatically locked due to age.

Top Replies

LuCar Toni 5 months ago in reply to FFin +2 suggested

In fact, if a client send a ARP to the Default GW of the other VLAN, SFOS will still answer, as it is responsible.

Parents

0 FFin 5 months ago

So you enter different gateway manually on your client?
As long as all vlans are routed by Sophos, Sophos will see source-ip of the packet and route/filter accordingly. No matter what Sophos ip on what interface you address.
Cancel
Vote Up +1 Vote Down

Cancel

Reply

0 FFin 5 months ago

So you enter different gateway manually on your client?
As long as all vlans are routed by Sophos, Sophos will see source-ip of the packet and route/filter accordingly. No matter what Sophos ip on what interface you address.
Cancel
Vote Up +1 Vote Down

Cancel

Children

0 LuCar Toni 5 months ago in reply to FFin

In fact, if a client send a ARP to the Default GW of the other VLAN, SFOS will still answer, as it is responsible.

__________________________________________________________________________________________________________________
Cancel
Vote Up +2 Vote Down

Cancel
0 André Pinto 5 months ago in reply to LuCar Toni

Yes, thats it.
The client can use the default GW of another VLAN, even of another port GW, and still answer.

Is this a default behavior?
Cancel
Vote Up 0 Vote Down

Cancel