Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 1243 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setup Static Public IP on firewall from 5G Router

avett1058

I have the static IP from the provider. 

They said there was no gateway, subnet or dns, just APN.

I'm looking to connect this similar to a WAN interface for a circuit.

I know we have to setup the router as a bridge/pass through.

I need the firewall to have the static Public IP.

Has anyone else experienced this before?

Any information is helpful.

Thank you!



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    a suggestion, try using a dynamic addressing, that should show you the missing information then you can convert to static addressing.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    Hi,

    a suggestion, try using a dynamic addressing, that should show you the missing information then you can convert to static addressing.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML