Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 11 replies
  • Answers 1 answer
  • Subscribers 42 subscribers
  • Views 3008 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Issue with static DHCP in 1 interface and dynamic DHCP in other interfaces

eclipse79

Hello

In Port 1 I set static DHCP for 1 client. If this client tries to connect to port 5 using DHCP (in this case I did not set any static DHCP) the client will not receive any IP.

If I remove the static DHCP entry for port 1, client will receive IP using port 5.

Do I have to use "system dhcp conf-generation-method new" command?

Thanks!

EDIT: I ran the command, restarted DHCP service, but the issue still occurs. I also tried to add the same mac address to the static DHCP for port 5.



This thread was automatically locked due to age.
Unfiltered HTML