Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Subnet issue

hello,

i have two ip subnet on port-1 Lan interface (Vlan),  the host pc can able to ping the Firewall Gw ip but from FIrewall  to Host ping not work, i checked the Local windows firewall its already turned off.

Now 100.0/22 subnet not reach to 15.0/24 subnet

i created a Rule like Source LAN SOurce Netwrk (15.0/24)
Destination LAN Destination Network ANY  Services ANY

Port1
LAN

Physical
    
Connected
1000 Mbps - Full Duplex
Auto-negotiated
    
192.168.100.19/255.255.252.0
Static
    
Hardware:  Port1
    
    
    
Gal
LAN

VLAN
    
N/A
N/A
    
192.168.15.19/255.255.255.0
Static
    
Hardware:  Port1.15

VLAN ID: 15



This thread was automatically locked due to age.
Parents
  • Hi,

    there is an easier firewall rule setup. Source zone LAN, Network any, destination zone LAN, network any, all services, allow and log. Place the rule at the top of tour list. As well that setup is a little more secure than using source zone of ANY.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • Hi,

    there is an easier firewall rule setup. Source zone LAN, Network any, destination zone LAN, network any, all services, allow and log. Place the rule at the top of tour list. As well that setup is a little more secure than using source zone of ANY.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data