Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 1132 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED 60 , No passing Untagged traffic .

RyanHosiassohn

Hey All, 

We seem to be having an issue, that when :

Switch Settings : 

Switchport mode : Switch is enabled  

It only allows untagged packets. 

 

How do we set it up that it allows Vlans and untagged traffic ? 

According to this article : 

https://docs.sophos.com/nsg/sophos-firewall/17.5/Help/en-us/webhelp/onlinehelp/nsg/sfos/concepts/RED50LanModes.html

Untagged Hypbrid port should work with one tagged and untagged . But then it only allows the vlan tagged and not the untagged. 

if we put like below it kills all traffic :  even if its under one line . separated by a comma 



This thread was automatically locked due to age.
Parents
  • 0

    So what we have discovered is , if left on switch - anything on the normal LAN untagged interface : 192.168.6.x gets IPs but none on the VLAN , 

    If kept on VLAN its opposite, Only tagged VLAN is given . 

    So if there is an AP on untagged network , then has an SSID that is on VLAN 30 for guests it seems that the AP doesn't get an IP . 

Reply
  • 0

    So what we have discovered is , if left on switch - anything on the normal LAN untagged interface : 192.168.6.x gets IPs but none on the VLAN , 

    If kept on VLAN its opposite, Only tagged VLAN is given . 

    So if there is an AP on untagged network , then has an SSID that is on VLAN 30 for guests it seems that the AP doesn't get an IP . 

Children
No Data
Unfiltered HTML