Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 1487 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XGS2100 bridge to connect switches

Jim Fox

We have set a bridge on ports 3 and 4 to plug the Aruba 2930 switches in parralell vs daisy chain, the bridge works as expected except we had an issue with printers. the pritners connected to port 3 work, but the printers on port 4 stop connecting, has anyone successfully used the bridge in this way?



This thread was automatically locked due to age.
  • 0

    Hello  ,

    if you want a redundant connection between your switches, you have to setup a LAG not a bridge.

    In my setup we have a passive XG Cluster with 2 Aruba 2930 switches with LAG and its working well.

    _______________________________________________________

    Sophos SG 210 with Sophos XG Home - 20.0 MR 1

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML