Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 40 subscribers
  • Views 1701 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NAT Remote Access VPN IP to internal IP

Werner Smit

Good Day,

Our Remote Access SSL VPN IP's are on a different subnet. 

Is there a way I can NAT it to our Internal IP's?

Currently they get 10.81.234.x/24 

Would like to NAT the IP to 10.0.0.x/16



This thread was automatically locked due to age.
Parents
  • 0

    Do you tried it ... and it didn't work?

    i would start masquerading all RAS-IP's behind the LAN interface-IP.

    If you need the other direction (LAN-to-RAS) 1:1 NAT may be an option ... you need matching address-ranges.

    Maybe a problem mixing these addresses with working LAN-IP's


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    Hi    

    Thank you both for the insights.

    So please correct me if I am wrong. I want to do the following. 

    NAT:

    VPN Pool (10.81.234.x/24) to VPN-Test (10.0.11.0/24)

    Only to give them the same IP's as within the 10.0.0.0/16 network range. We have open IP's at 10.0.11.0/24 range

Reply Children
No Data
Unfiltered HTML