Help us enhance your Sophos Community experience. Share your thoughts in our Sophos Community survey.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 38 subscribers
  • Views 2042 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VLAN subnet extension. New addresses unusable.

woter324

Hi,

I have increased the size of a subnet from /27 to /26 and any node with an IP beyond the range of /27 has connectivity issues.

I have done this before and don't remember having issues. Apart from Network > Interfaces > VLAN > {Port} > IPv4/netmask, is there anywhere else I need to go to make changes?

The XG is the only layer 3 device on the network. Switches are all layer 2.

XG and switches have been rebooted several times.

XG version: SFOS 19.0.1 MR-1-Build365 (My device hasn't picked up 19.5 yet and I can't find the option to manually upload).

I've checked the routing table from the advanced console with route -n and the VLAN in question has the correct mask (255.255.255.192).

Thank you.



This thread was automatically locked due to age.
Unfiltered HTML