I am triyng to add an IP host as first step with api.
I am using the following direct in browser (chrome & Firefox): serintxgfire:4444/.../APIController APIVersion="1900.1" IPS_CAT_VER="1"><Login><Username>StudioApiInt</Username><Password passwordform="encrypt">C5AD550AB773AD7042A54C1C75256C98</Password></Login><Set operation="add"><IPHost><Name>000ATest10</Name><IPFamily>IPv4</IPFamily><HostType>IP</HostType><IPAddress>198.1.2.1</IPAddress></IPHost></Set></Request>
I have tryed with plain password (worse), without specifying ApiVersion etc. but i get always the same result below or no response at all.
<Response APIVersion="1900.1" IPS_CAT_VER="1">
<Login>
<status>Authentication Failure</status>
</Login>
</Response>
I suppose the encypted password is correct based on test below; from encrypted key to decrypted key successful.
I have configured the api administrator following https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp/BackupAndFirmware/API/index.html
Any suggestion?
This thread was automatically locked due to age.