Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 8 replies
  • Subscribers 41 subscribers
  • Views 5052 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Captive Portal issue (ntlm 8091)

Kumaran v

I had updated the firmware for sophos firewall yesterday and after that we are facing the captive portal issue.

Our setup:

We have STAS enabled for domain systems where users can use internet directly after logging into domain pc's, those who are out side domain environment will get a captive portal to access the internet. Since the latest firmware update, we are not getting redirected to the captive portal instead we get the ntlm page. I have attached screenshots. Need a solution.



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to leonardo097

    STAS is a method of authentication.
    AD SSO is a method of authentication.

    Having both enabled at the same time causes problems as they both try to authenticate the same connection.

    So for "Is there another option" the answer is "use the STAS that the original poster said was enabled".

Children
Unfiltered HTML