This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bridge VLAN and port together

Hi all

im searching a solution for this topic:

I have made a Zone (Serverzone) and i want it to be as VLAN in Port 3 but i also want it to be in the Port 2(not as VLAN, direct)
i tried to made a bridge, but then the VLAN Port didn't work, so whats the best way to do so?

The goal is that both the port and the vlan receives IPs(DHCP) and that the devices behind them are accessible by they're IP in the range of 192.168.200.XX

thanks in advance for your help!

best regards



This thread was automatically locked due to age.
Parents
  • Hi,

    are you experimenting or trying to make this a permanent setup? I m trying to work out the rational behind such a configuration?

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • my goal was to have the raspi connected right to the fw because if something happend with the switch (may down or something) the Raspi still will be online.

    and as i have multiple zones where my switch is, i tagged the Server Zone with the ID 200 so that it can reach the firewall..

    im not a pro, still learning so if you have helpful feedback for me, i will be happy ;)

    Cris

Reply
  • my goal was to have the raspi connected right to the fw because if something happend with the switch (may down or something) the Raspi still will be online.

    and as i have multiple zones where my switch is, i tagged the Server Zone with the ID 200 so that it can reach the firewall..

    im not a pro, still learning so if you have helpful feedback for me, i will be happy ;)

    Cris

Children