Hello All
We are changing ISPs and elected to not go with a Managed Router by the ISP.
Therefore the new IP address schemas they provided are as follows:
WAN
CR IP: 32.*.*.182/30
AR IP: 32.*.*.181/30
WAN IP: 32.*.*.180/30
LAN
Gateway: 12.*.*.105
Usable Range: 12.*.*.106 thru 12.*.*.110
Subnet Mask: 255.255.255.248
If we would've gone with a Managed Router, then we'd setup our XG WAN interface with the LAN details (12.X.X.X)
Instead, we have to setup routing between WAN (32.X.X.X) and LAN (12.X.X.X) first. I understand how to do this with a separate piece of hardware but not with the XG.
Internet <---> WAN (32.X.X.X) <---> LAN (12.X.X.X) <---> XG WAN (12.X.X.X) <---> XG LAN (192.168.X.X)
With that said how do I configure the XG so that if a User (192.168.X.X) navigates to sophos.com, the network path routes to XG WAN (12.X.X.X) and then routes to WAN (32.X.X.X) and finally to sophos.com? If I were to do a public IP lookup, it should show (12.X.X.X), not (32.X.X.X).
Hopefully that makes sense.
Your help is appreciated!
Thank you
This thread was automatically locked due to age.
