Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 11 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 2209 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WAF not working on port 80

Pablo_CV

I'm getting crazy with WAF on XG 18: it works on every port but not on port 80. The first rule on top is the WAF rule. If I use port 80 as listening port, I cannot reach the webserver, but if I use any other port, it works perfectly. What should I check?



This thread was automatically locked due to age.
Parents
  • 0

    Use packet capture tool to filter incoming traffic to see what happens to inbound traffic. See if traffic reaches to firewall and if it's forwarded which firewall rule an NAT rule is applied. Try "host source_client_ip_address and port 80" for packet capture filter. do not include double quotations and post the results here for further investigations.

Reply
  • 0

    Use packet capture tool to filter incoming traffic to see what happens to inbound traffic. See if traffic reaches to firewall and if it's forwarded which firewall rule an NAT rule is applied. Try "host source_client_ip_address and port 80" for packet capture filter. do not include double quotations and post the results here for further investigations.

Children
Unfiltered HTML