I'm getting crazy with WAF on XG 18: it works on every port but not on port 80. The first rule on top is the WAF rule. If I use port 80 as listening port, I cannot reach the webserver, but if I use any other port, it works perfectly. What should I check?
I don't know, you are using XG, and this is the UTM forum 
Besides, I'm not proficient at all with XG, sorry I can't help with WAF on that platform.
With anything else though, I'd check your logs related to WAF and see if it gives any errors.
OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
(Former Sophos UTM Veteran, Former XG Rookie)
I don't know, you are using XG, and this is the UTM forum
Besides, I'm not proficient at all with XG, sorry I can't help with WAF on that platform.
With anything else though, I'd check your logs related to WAF and see if it gives any errors.
OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
(Former Sophos UTM Veteran, Former XG Rookie)
