This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

L2tp vpn remote users access to site to site network.

Main site(x.x.0.0/23) connects via an ipsec site to site connection to a cloud site(x.x.100.0/24) and the L2tp vpn users are on(x.x.50.0/24) which connect to the main site.  I setup the ipsec connection to include the x.x.50.0/24 range on main site and cloud site vpn definition.  I'm getting this when I set it up this way

If I disable the l2tp definition with the x.x.50.0/24 range I'm able to get green on both but now vpn users cannot connect  What is the correct way to set this up so remote users can access the cloud?  Thank you.



spelling



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    Did you configure the correct local and remote subnet on both sites?

    Could you please provide strongswan logs from the firewall? 

    Thanks,

Reply
  • FormerMember
    0 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    Did you configure the correct local and remote subnet on both sites?

    Could you please provide strongswan logs from the firewall? 

    Thanks,

Children
No Data