Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 728 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos RED 50 configuration

interne IT

Hello,

we are currently running into some difficulties getting a Sophos RED 50 to work in a branch office.

We configured the RED in our XG Firewall as shown in the provided documentation. The RED is able to establish a tunnel to our Firewall via internet and is shown as online in the Firewall, however if we connect a client to the RED at the remote site we get neither a LAN connection to our main network nor a WAN connection to the internet. We can however ping both the internal and external IP of our Firewall.

These are the firewall rules we configured for the RED:

 

 

We have also added a DNS host entry for the RED in the XG configuration.

Are we missing something here?

Any help is kindly appreciated



This thread was automatically locked due to age.
Parents
  • +1

    Assuming you are coming from UTM/SG, your Firewall Rule is not matching.

    #reds2 is the Interface of RED. Not the Zone. 

    Use ANY and RED as Zone, should work and match. (Only if the RED50 has Zone RED configured). 

    __________________________________________________________________________________________________________________

Reply
  • +1

    Assuming you are coming from UTM/SG, your Firewall Rule is not matching.

    #reds2 is the Interface of RED. Not the Zone. 

    Use ANY and RED as Zone, should work and match. (Only if the RED50 has Zone RED configured). 

    __________________________________________________________________________________________________________________

Children
No Data
Unfiltered HTML