Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 42 subscribers
  • Views 5925 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multicast Bonjour Apple TV Traffic?

yesandno

Hi,

 

I know my question is pretty simple (I think) I am just not sure how to configure the XG.

So I have Flat LAN with a separate DHCP Server with the ATVs and other clients on there and I am using the XG as the router (Lets say 192.168.2.1). We can call this, "Network A" on subnet mask 255.255.0.0 (Yes I know its large)

I then have on "Network B" a DHCP Server through the XG and also using the XG as the router (Lets say 192.168.6.1) VLAN Tagged from Network A LAN port. With a subnet mask 255.255.254.0 (Yes I know wrong IP Class) This network serves another set of clients where the Apple TVS do not live.

How do I go about creating a route or bridge to the other network to allow bonjour/multicast traffic so clients on Network B can cast to an ATV without being directly next to it.

 

Thank You in advance for any feedback.



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

     

    Unknown said:
    How do I go about creating a route or bridge to the other network to allow bonjour/multicast traffic so clients on Network B can cast to an ATV without being directly next to it.

     

    You can do this with Multicast Routing on XG.

    First enable Multicast Forwarding on XG, It's located at Routing => Static Routing, and on the bottom of the page.

    Then you can create the necessary multicast route. Here's an example  for the Apple TV (Apple Bonjour specifically).

    On Source IPv4 address, It will be your Apple TV address - Also if you can, create a static mapping on XG DHCP for it.

    The Source Interface is the interface that's located the device.

    On Multicast IPv4 Address It will be "224.0.0.251", since that's the IPv4 that the Apple TV is currently using for it. (Also I'm not 100% sure that's the correct IPv4, but after searching - I believe It is.)

    And on Destination Interface will be where the traffic will be routed.

     

    Also in case someone is having the same issue but with chromecast, the only difference will be the Multicast IPv4. (chromecast uses "239.255.255.250"). (I've faced the same issue before.)

     

    Thanks!

    If a post solves your question use the 'Verify Answer' button.

    Ryzen 5600U + I226-V (KVM) v21 GA @ Home

    Sophos ZTNA (KVM) @ Home

  • 0 in reply to Prism

    Hi,

     

    I tried the static routing and no dice. Client on Network B still cannot screen mirror to the Apple TV on Network A. Remember Network A is using a separate DHCP server but the XG as the router and Network B is using DHCP and Router on XG side. I even created a firewall rule to allow LAN-LAN traffic with no luck.

    Thanks.

  • 0 in reply to yesandno

    I don’t think it’s possible with Sophos XG:

    ---

    Sophos XG guides for home users: https://shred086.wordpress.com/

Reply Children
No Data
Unfiltered HTML