Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware Limitations In Home version

Is it possible to get the hardware limitations removed for the home version?  Or have they been removed in V18?

This thread was automatically locked due to age.
  • Hi Michael,

    let me try an put things into perspective

    1/. XG is a 64bit OS.

    2/. many XG  installations only have 2gb of ram using v17, v18 needs 4gb.

    3/. 75% ram usage on a linux system is not an issue like on a MS system. Linux has a very much better memory management system and uses swap effectively.

    4/. a while ago many forum member were very upset that their XG's memory usage was running around the 70-80% mark. Sophos XG devs took notice added a lot of new functionality and refined the XG, they also tuned the load management as reported in the GUI and diagnostics. 

    My system is currently showing around 60% memory usage which grows if I leave the GUI open for too long, but shrinks when the GUI is closed. Prior to v18 my XG memory usage was around 75% on a 6gb system.

    If you are a home user and like to fiddle with your firewall settings, then a J1900 or XG85/6 or XG 105/6 is not for you. If you are a set and leave then they will be fine depending on your internet connection speed of course. I have J1900 4 port NIC system which I use for testing, but it is too slow when making changes or reviewing logs for my regular use.


    XG115W - v20.0.1 MR-1 - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • I had a feeling, which is why I feel like they should just unlock it rather than have the hardware limitations on the package.  Until they remove the hardware limitations I can't see the reason to switch to Sophos.  I think this is a sad thing they have chosen to do, and could have easily unlocked for the $50/year subscription; as well as allowing unlimited devices.  It's not hard to prove the device is at a house location.  I hope the developers actually read this post, and see the benefit for unlocking the hardware limitations.

    There's quite a lot of people arguing on their behalf that the hardware limitations in the software are more than enough hardware.  I feel these people just don't understand that you should be allowed to use faster processors and more ram if you deem it necessary.  I understand the company wants you to buy their devices, but then why have a software package available at all to home users.  They obviously realized a need, but determined that a limitation should be on that need.  

    Any who this seems pointless at this time; as the developers will not unlock the software package for users.  Therefore, I will continue to use PFSense rather than giving the Sophos developers a yearly subscription fee.  Good luck to others; maybe they will finally realize this is the right thing in V20.

  • There is a thing of cutting off your nose to spite your face - by all means stick with PFSense if you so wish - just to are aware of the security vulnerabilities that exist in the product?

    If not, pass me your IP address and I'll give you a demonstration...

    Tim Grantham

    Enterprise Architect & Business owner

  • Hi Michael,

    you can use the fastest intel processor money can buy, nothing stops you building a system around it, but you need a special mother board, big power supply and lots of heatsinks. But you gain nothing in performance eg my e3 is the same processor Sophos use in their topend models.

    Also it is not a developer issue it is a marketing issue.

    Please let Tim demonstrate PFSense to you.


    XG115W - v20.0.1 MR-1 - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • As a company, before we take on support of clients networks we put things through a PEN test, PFsense has always produced interesting results to say the least, it's good for a "home" protection and better than the NAT based solutions you had with the standard routers provided, but no where near good enough for the enterprise.


    You have to think, what would you prefer?  An enterprise solution for home, albeit with some hardware limitations, or an open-source experiment for the home market.

    Tim Grantham

    Enterprise Architect & Business owner

  • @Michael Caplan

    Sophos don't want your $50. More hassle than it is worth and I can well understand why they dropped it for UTM. One of the things I don't miss moving to XG is the 50 IP limit. In itself it was OK for a home network but as it is my 'playground' I quite often exceeded it testing new network setups. Ended up having to reinstall UTM each time it happened.

    I don't agree it is 'easy' to verify whether Home is genuinely being used at 'Home' - which would also require more time and effort (which means money). Sophos put a cap on to prevent people using it illegally in large commercial environments.

    I am grateful to be able to use it free at home. It also benefits Sophos (which is why they do it). From being able to use it and evaluate it at home, I have since become a Sophos partner and have several installations planned for customers.

    I also really can't understand your view point. The current cap should allow you to use it in a home environment, even with 1Gb connections, for the forseeable future as long as you have the right spec hardware. What is the problem?

    @Mike Scott

    I've installed the home edition on both a 125 rev2 and a 430 (my current home kit). It can be tricky getting it to install on the installed SSD so I just replaced it with a new SSD and then installation was easy. A small SSD is cheap and I got the 430 for £300 which is cheaper than anything I could buy new of similar spec and it fits nicely in my rack (yes, I'm sad enough to have a rack at home). The only thing you lose is hardware specific support (for instance the LCD display doesn't show anything meaningful).

  • Makes sense and the best way of understanding what you're taking on.  Many years ago when I worked in the MSP space we walked away from a big customer as so many issues were identified during the pre-onboarding process.  They refused to have items address or money spent, so the contract never moved forward.  I visited their rented datacentre space in Canary Wharf and it was horrific.

    Interesting re pfsense, particularly as I've seen large orgs using it.  Going to google it a bit more, even with version 2.4.5?  Problem with any vendor is getting past the marketing blurb.  Take Unifi for example, awful edge products imho

    I've worked with Fortigate, Cisco (PIX/ASA), Microsoft ISA (shudder)..  My main skills though is infra, vmware, Wintel, networking and so forth.


    Only exposure to Sophos XG at the moment is at home and I like it.  The problem with any solution installed at home is are they left in the default setup.

  • Thanks for you time I just wanted a simple answer; no the limitation is still present.  No clue why you guys argue that the limitation is acceptable; it’s not for me.  I’ve stated it multiple times, but you guys seem programmed that limitations are okay.  Cool; it’s not for me...

    No point in continuing this post any longer.   Thanks again for your time.  Please mark this post as closed or delete it.

  • Not arguing, I just accept what Sophos offer as do I accept what the other vendors offer.


    Each individual's requirement is different and enjoy whatever fits your requirements best.  I'm still determining what's meets my needs best, but then I also like to explore vendors offerings.

  • Was in reply to the others not you; as you seem to be in a similar boat of testing new packages.  Good luck on figuring out what works best for you.