Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 41 subscribers
  • Views 2679 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Not all devices are getting their IP from the DHCP Static List

Joe Schmoe

Most devices on the network have taken their IP address from the Static List in DHCP.
Some devices though, are getting assigned 169.254.x.x addresses.  

How can I get these devices to pick up the right IP?  Some of them are headless devices that I can't obtain their current IP

I have a Netgear Managed Switch that has three VLANs setup: 11, 22, 33.  When I connect to a port on for VLAN11, some devices pick up the right IP from XG, some get the 169.254.


I must be missing something obvious. Any ideas?

 

Overall network:

VLAN1.11:

 

Port 1:

 

DHCP Servers:



This thread was automatically locked due to age.
Parents
  • 0

    Hi Joe,

    the 169 address is a self assigned address because the device does not get a response from the DHCP server.

    Next you have the same IP address range assigned to two different interfaces.

    Your devices should be talking to untagged VLAN 11 ports on your switch after you change the port 1 physical port IP address.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    So by chance I did this:

    turned on DHCP for port 1 for a range of 4 IPs that wll never get used and now it's working.  Question is .... why?

  • 0 in reply to Joe Schmoe

    Hi,

    because your devices will be pull IP addresses from port 1 not port 1.11. You need to change the IP address of port 1 because you will have routing issues.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0 in reply to Joe Schmoe

    Hi,

    because your devices will be pull IP addresses from port 1 not port 1.11. You need to change the IP address of port 1 because you will have routing issues.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML