Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 11 replies
  • Subscribers 43 subscribers
  • Views 6725 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

High CPU usage on v18 on XG115

Breakingcustom

I upgraded an XG 115 to v18 and ever since then the CPU has been normally sitting at 75% and will occasionally get up to 85-95%.  The odd thing is there is only one person in the office.

Anyone else seeing similar issues?



This thread was automatically locked due to age.
Parents
  • 0

    Hi, I had the same issues.

    Please write which version of v18 You have installed on XG 115.

    I tried anything, and last i installed clean setup and reduced IPS signatures category, target and platform (if You have windows devices only, try to choose windows sinatures).

    I think, You have problem with snort. You can also switch your SFOS to DPI mode and switch web protection to real time scanning.

    I hope it will help You. My graphs for now:




Reply
  • 0

    Hi, I had the same issues.

    Please write which version of v18 You have installed on XG 115.

    I tried anything, and last i installed clean setup and reduced IPS signatures category, target and platform (if You have windows devices only, try to choose windows sinatures).

    I think, You have problem with snort. You can also switch your SFOS to DPI mode and switch web protection to real time scanning.

    I hope it will help You. My graphs for now:




Children
No Data
Unfiltered HTML