Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I have to change hardware

Hello fellas.

Im about to change my hardware - old PC. Its not enought.

What is recommended specification for proper work, performance etc.

Is i3 6gb will be enought ?;)

Ofcourse im talking about home usage^^ xgHome



This thread was automatically locked due to age.
Parents
  • Hi,

    I would suggest you do a search of the XG forums, there are plenty of similar requests.

    A quick summary though, quad core very fast CPU, (not I5 or I7), 6gb ram and a minimum of 2 NICs

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • I dont get ya a little bit. "Quad-Core" not i5 i7 ? So i3 should be good ? Ofcourse with aes-in

    __________SETUP___________

    HP Small Form Factor:  i5 4Cores, 8Gb of RAM.
    Intel Network Card 5x Eth
    SSD: 256Gb

Reply Children
  • Hi Roman,

    There is no need for the maths core of the I series processors, just overhead heat, a very fast celeron 3ghz or greater is more than adequate for home use.

    Does that make sense.

    As you can see from my signature I use an E3, because it was cheaper, lower power and was able to get a small motherboard (server without all the PC overhead chips).

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • AES-IN will be a great idea regarding to if you using DPI. Isnt it ?  I know that is overkill but from my perspective its better to have more instead of less ^^

    At im using IPS SslInspection AV webfilterring etc.

    __________SETUP___________

    HP Small Form Factor:  i5 4Cores, 8Gb of RAM.
    Intel Network Card 5x Eth
    SSD: 256Gb

  • Hi Roman,

    that would be nice, but the current home version does not use AES-NI. There is a thread about it but no-one from Sophos has added any value. My e3 has AES-NI.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.