Port Forward to an internal server

Question

Hello, 
 There is 2 internet connection from 2 isp. 
 One at 192.168.0.x (Failover) 
 2nd at 192.168.1.x (this one in use) 
 
 All the network is at 192.168.100.xx 
 I need to open the port 8100 to an internal server at 192.168.100.210 and i cant get it work. 
 Here is the screenshots from the business rule :

Thanks a lot for your help.

VikenNajarian · Accepted Answer

go in diagnostics >packet capture of XG, click on configure, and type : port 8100 (in "Enter BPF string") then save like this: 
 
 then tick the "on" button and try to reach your public IP with port 8100 from the internet and see what happens on the packet capture, you should see things like this when you click on the "refresh" button: 
 
 If the capture result is empty, this is because the traffic don't even reach your XG, so this is your ISP router that it is blocking the traffic before it reaches the XG.

VikenNajarian · Answer

Hello, 
 
 Your firewall IP is 192.168.1.2. I assume that there is another router between your XG and Internet doing NAT. Did you redirect the 8100 port of your router to the 192.168.1.2 IP? Or you can try to place the 192.168.1.2 in the DMZ, in order to redirect all the ports to the XG and let the XG filter the ports. 
 
 Regards