Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 40 subscribers
  • Views 3206 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SETTING A SERVER TO USE SECOND WAN ONLY

Dan Reed1

Hi,

 

I have two WAN addresses I would like all of the internal LAN to use WAN1 only and a single server VM to use WAN2 only. I have a 105w and two ports are used for the WAN1 and WAN2 one is used to connect to a switch on the LAN and the other is connected to the server. The tricky bit is that the server runs two VMs one for the LAN for storage etc (x.x.x.25) and the second for public access (x.x.x.35). 

How do I allocate WAN2 to have exclusive access to the second VM (x.x.x.35). Whether this is the right way I do not want to advertise the WAN1 address for public access and do not want the second VM to have access to the LAN.

 

Thanks in advance. 

 

Dan

 



This thread was automatically locked due to age.
Parents
  • 0

    Do you have two WAN interfaces or one WAN Interface with a Gateway and a Alias? 

    __________________________________________________________________________________________________________________

  • 0 in reply to LuCar Toni

    Hi,

     

    Thanks for the response. I currently have it set up as an alias. 

     

    Cheers

     

    Dan

  • 0 in reply to Dan Reed1

    Could you quickly draw a picture of your network plan? I cannot quite follow you. 

    __________________________________________________________________________________________________________________

  • 0 in reply to LuCar Toni

    Hi,

     

    Please see the "sketch" below.

     

     

    The office users need to have access to the file server VM and the internet using the WAN 1 IP. I would like the public server to access the internet via the WAN 2 IP and not have access to the File Server or Office Users.

     

    The router manages / acts as a gateway to distribute the 5 IP addresses we have. I have set an alias on Port 2 which goes to the router as the WAN 2IP.

     

    The server has two network connections one used in the file server VM connected to the LAN and works great. The public access server is connected to the firewall as a DMZ. The public access server cannot connect to either of the WAN connections. Below is my firewall rule but doesn't seem to work. 

     

     

    If you can advise a better way or where I have gone wrong that would be greatly appreciated.

     

    Cheers

     

    Dan

Reply
  • 0 in reply to LuCar Toni

    Hi,

     

    Please see the "sketch" below.

     

     

    The office users need to have access to the file server VM and the internet using the WAN 1 IP. I would like the public server to access the internet via the WAN 2 IP and not have access to the File Server or Office Users.

     

    The router manages / acts as a gateway to distribute the 5 IP addresses we have. I have set an alias on Port 2 which goes to the router as the WAN 2IP.

     

    The server has two network connections one used in the file server VM connected to the LAN and works great. The public access server is connected to the firewall as a DMZ. The public access server cannot connect to either of the WAN connections. Below is my firewall rule but doesn't seem to work. 

     

     

    If you can advise a better way or where I have gone wrong that would be greatly appreciated.

     

    Cheers

     

    Dan

Children
Unfiltered HTML