I have my XG communicating with A Fortinet using OSPF. The routes are all being picked up correctly however it seems like the Sophos does not pick up the default route correctly. It shows it in the table but unless I add a static route the Sophos can't get to the internet. I have to go into static routing and add 0.0.0.0/0.0.0.0 destination 192.168.250.4 interface port1.250. The Fortinet is redistributing the default route. I also have a Palo Alto in there connected by OSPF also and it is getting the default route also and working correctly so I know it's not my Fortinet distributing the route wrong.
The output of the XG Routing:
============ OSPF network routing table ============
N 192.168.21.0/24 [10] area: 0.0.0.0
directly attached to Port1.21
N 192.168.31.0/24 [11] area: 0.0.0.0
via 192.168.250.4, Port1.250
N 192.168.41.0/24 [20] area: 0.0.0.0
via 192.168.250.5, Port1.250
N 192.168.250.0/29 [10] area: 0.0.0.0
directly attached to Port1.250
============ OSPF router routing table =============
R 192.168.250.4 [10] area: 0.0.0.0, ASBR
via 192.168.250.4, Port1.250
R 192.168.250.5 [10] area: 0.0.0.0, ASBR
via 192.168.250.5, Port1.250
============ OSPF external routing table ===========
N E2 0.0.0.0/0 [10/10] tag: 0
via 192.168.250.4, Port1.250
This is on firmware: SFOS 17.5.5 MR-5
This thread was automatically locked due to age.
