Hi XG Community!

We've finished SFOS v17.0.6 MR6. This release is available from within your device for all SFOS v17.0 installations as of now.

Besides that, the release is available to all SFOS version via MySophos portal.

Notes

Issues Resolved

  • NC-26520 [Base System] Logviewer exceeds allotted diskspace
  • NC-26601 [Base System] validatePort didn't validate all used ports correctly
  • NC-25574 [IPsec] Upgrade to v17 failed when a policy with name 'IKEv2' was created before upgrade
  • NC-26694 [IPsec] High memory usage of charon
  • NC-27001 [IPsec] Unable to enable the fail-over group for IPSec
  • NC-27228 [IPsec] IPsec connection ref count sometimes wrong
  • NC-27276 [IPsec] IKEv2 connection not retried when receiving AUTH_FAILED
  • NC-27278 [IPsec] Display issue in IE11 for IPSec Connections - NAT
  • NC-27283 [IPsec] HA: Hard reset failover takes too long
  • NC-27333 [IPsec] HA: Connections not synced to aux when pushing connect button
  • NC-27384 [IPsec] Race condition in charon when 60s retry timeout and IKE_INIT occur close together
  • NC-27412 [IPsec] IPSec failover group shows 2 active connections
  • NC-27510 [IPsec] IKEv1: cannot handle more than 2 concurrent Quick Mode exchanges per IKE_SA
  • NC-27608 [IPsec] IPSec Profiles XML has no information for new added configuration
  • NC-27734 [IPsec] Unable to recreate the config using the same connection name in Cisco VPN connection after reset
  • NC-27916 [IPsec] CSC freezing sporadically & system goes unresponsive
  • NC-28090 [IPsec] Follow Up - VPN connection can't be established if the PSK is very long
  • NC-27240 [Mail Proxy] Unable to send emails due to auto routing to rcpt DNS in case of greylisting reply for MX
  • NC-27382 [Network Services] DHCP Relay didn't work after upgrade to SF v17 MR3
  • NC-26104 [Networking] Networkd dead in HA setup
  • NC-27488 [WAF] Mod_url_hardening stack corruption

Downloads

You can find the firmware for your appliance from in MySophos portal.

Parents
  • I just installed the MR6, I hope it fixes my issue on memory and CPU usage of 100%

    somebody else has the same problem? I have a XG105w with 21 VPNs. My network consists of 4 users and I have the e-mail traffic of 14 companies for a total of about 11,000 e-mails per day.

    BR

Comment
  • I just installed the MR6, I hope it fixes my issue on memory and CPU usage of 100%

    somebody else has the same problem? I have a XG105w with 21 VPNs. My network consists of 4 users and I have the e-mail traffic of 14 companies for a total of about 11,000 e-mails per day.

    BR

Children
No Data