Related
Recommended
talex

Hi XG Community!

We've finished SFOS v16.05.8 MR8. This release is available from within your device for all SFOS v16.05 installations as of now.

The release is available to all SFOS version via MySophos portal.

NOTE: The upgrade from SFOS v16.05.8 MR8 to v17.0 Beta is currently not supported.

Update: The upgrade from SFOS v16.05.8 MR8 to v17.0 RC-1 and v17.0 GA is supported.

Issues Resolved

  • NC-21404 [Authentication] Authentication Agent - getting logged out automatically at random time
  • NC-21538 [Authentication] STAS user login getting failed because access_server is assigning existing liveuserid to new login user
  • NC-19642 [Base System] Apache httpd vulnerabilties (CVE-2017-3169, CVE-2017-7679)
  • NC-19915 [Base System] Add support for newer SG210,SG230,SG310,SG330,SG430,SG450,SG550 and SG650 models in SFOS
  • NC-21583 [Base System] Up2date patterns status is shown as "Failed" in 16.05 MR7
  • NC-22018 [Base System] Openssl update for v16.05
  • NC-22059 [Firewall] SSL decryption should not be enabled by the wizard
  • NC-19646 [IPS] i40e driver version 1.1.23 doesn't work properly with 4x10G ports
  • NC-21712 [IPS] IPS service not starting in v16.05 MR7
  • NC-21566 [Mail Proxy] Inbound emails stopped in legacy mode after upgrade to 16.05 MR-7
  • NC-18875 [Networking] USB devices not reconnecting after reboot
  • NC-20763 [RED] RED15w does not send split DNS traffic over RED tunnel
  • NC-20531 [SecurityHeartbeat] Server certificate expired - all clients will be marked as RED
  • NC-22152 [Web] NTLM channel re-initiated repeatedly on booting the appliance
  • NC-21548 [Wireless] API for Wireless Network Enable/Disable
 
All issues resolved in this release are also addressed in SFOS v17.0.

Downloads

You can find the firmware for your appliance from in MySophos portal.

 
Parents

  • We're running on a patched MR7 for authentication issues. It would be good to hear if anyone can confirm that auth issues have truly been resolved.  This plus the "drop packet learning mode" caused havoc and this was a new purchase, so we just thought that this is the way it ran.  Four different support people and not one mentioned the "drop packet learning mode" that is set to 2 minutes by default.  It was the third who finally found that we were using STAS and I found the learning mode document when reading about STAS.  Our support person said that he didn't even know that the FW functioned this way.  I'll install the MR8 at home, but I'm holding off on our production unit.

    Mark

Comment

  • We're running on a patched MR7 for authentication issues. It would be good to hear if anyone can confirm that auth issues have truly been resolved.  This plus the "drop packet learning mode" caused havoc and this was a new purchase, so we just thought that this is the way it ran.  Four different support people and not one mentioned the "drop packet learning mode" that is set to 2 minutes by default.  It was the third who finally found that we were using STAS and I found the learning mode document when reading about STAS.  Our support person said that he didn't even know that the FW functioned this way.  I'll install the MR8 at home, but I'm holding off on our production unit.

    Mark

Children
No Data
Unfiltered HTML