Hi XG Community!

We've finished SFOS v16.05.8 MR8. This release is available from within your device for all SFOS v16.05 installations as of now.

The release is available to all SFOS version via MySophos portal.

NOTE: The upgrade from SFOS v16.05.8 MR8 to v17.0 Beta is currently not supported.

Update: The upgrade from SFOS v16.05.8 MR8 to v17.0 RC-1 and v17.0 GA is supported.

Issues Resolved

  • NC-21404 [Authentication] Authentication Agent - getting logged out automatically at random time
  • NC-21538 [Authentication] STAS user login getting failed because access_server is assigning existing liveuserid to new login user
  • NC-19642 [Base System] Apache httpd vulnerabilties (CVE-2017-3169, CVE-2017-7679)
  • NC-19915 [Base System] Add support for newer SG210,SG230,SG310,SG330,SG430,SG450,SG550 and SG650 models in SFOS
  • NC-21583 [Base System] Up2date patterns status is shown as "Failed" in 16.05 MR7
  • NC-22018 [Base System] Openssl update for v16.05
  • NC-22059 [Firewall] SSL decryption should not be enabled by the wizard
  • NC-19646 [IPS] i40e driver version 1.1.23 doesn't work properly with 4x10G ports
  • NC-21712 [IPS] IPS service not starting in v16.05 MR7
  • NC-21566 [Mail Proxy] Inbound emails stopped in legacy mode after upgrade to 16.05 MR-7
  • NC-18875 [Networking] USB devices not reconnecting after reboot
  • NC-20763 [RED] RED15w does not send split DNS traffic over RED tunnel
  • NC-20531 [SecurityHeartbeat] Server certificate expired - all clients will be marked as RED
  • NC-22152 [Web] NTLM channel re-initiated repeatedly on booting the appliance
  • NC-21548 [Wireless] API for Wireless Network Enable/Disable
 
All issues resolved in this release are also addressed in SFOS v17.0.

Downloads

You can find the firmware for your appliance from in MySophos portal.

 
Parents
  • Downloaded and installed MR8 without issues, my installation is simple other than having 4 WAN's.

    Starting from MR6 (but could be earlier). I have noticed an improved management of WAN's, to the point that it looks more like bonding than simple round robin.

    For instance, I have been able to get 50+ Mbps from two 30 Mbps WAN's (only during low traffic periods): impressive.

    Previously, I had skipped MR7 based on issues by others.

    Marco

Comment
  • Downloaded and installed MR8 without issues, my installation is simple other than having 4 WAN's.

    Starting from MR6 (but could be earlier). I have noticed an improved management of WAN's, to the point that it looks more like bonding than simple round robin.

    For instance, I have been able to get 50+ Mbps from two 30 Mbps WAN's (only during low traffic periods): impressive.

    Previously, I had skipped MR7 based on issues by others.

    Marco

Children
No Data