This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Passcode issue with Windows phones

I have numerous WM10 phones starting to report they do not have a passcode (they do and have done since being built)

There have been no changes to SMC so am at a loss as to why they are starting to report they have no passcode.

If you look in the device properties it is showing

PasscodePresent

0

The only way I have found so far is a wipe of the device and re-enrolling it

Any ideas??

we are on Server version: 7.0.10 (rev 9932) though I will be updating to 7.1 tomorrow. 

 

John



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hello John,

    Thanks for getting in touch.

    Could you please let us know what Windows Mobile versions are affected, the version of the OS they're running, what updates are applied, what Sophos Mobile versions are installed, does the issue no return after wiping and re-enrolling? What about new devices that are fully updated then setup, do they suffer the same issue?

  • Hi Toby

    The devices are Lumia 650s and Lumia 640s

    The firmware versions are

    WM 10.0.15063.674
    WM 10.0.15063.540
    WM 10.0.15063.483
    WM 10.0.15063.608
    WM 10.0.15063.297
    WM 10.0.15254.1
    WM 10.0.15063.414

    The Control apps are

    7.0.30.0
    6.1.1160

    The first date detected was 06/10/2017

    If a device is wiped and re-enrolled they seem OK

    Un-enrolling a device and re-enrolling does not seem to work 

    Devices that are compliant do not have the option to remove the pin but ones that have become non-compliant do have the option to remove the pin

    When built the policy accepts a simple pin ie 1234 but once they go non-compliant this type of pin is now not acceptable

    Not all devices have gone non-compliant, however more are failing each day.

     

    Hope this helps

     

    John

Reply
  • Hi Toby

    The devices are Lumia 650s and Lumia 640s

    The firmware versions are

    WM 10.0.15063.674
    WM 10.0.15063.540
    WM 10.0.15063.483
    WM 10.0.15063.608
    WM 10.0.15063.297
    WM 10.0.15254.1
    WM 10.0.15063.414

    The Control apps are

    7.0.30.0
    6.1.1160

    The first date detected was 06/10/2017

    If a device is wiped and re-enrolled they seem OK

    Un-enrolling a device and re-enrolling does not seem to work 

    Devices that are compliant do not have the option to remove the pin but ones that have become non-compliant do have the option to remove the pin

    When built the policy accepts a simple pin ie 1234 but once they go non-compliant this type of pin is now not acceptable

    Not all devices have gone non-compliant, however more are failing each day.

     

    Hope this helps

     

    John

Children