This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

115w - WiFi failing every day after firmware update

Hello,

I am running a 115w on 9.411-3 with the internal WiFi at 2.4GHz and bridged to AP LAN for over a year now with no problem at all, but since about one week I have noticed that the wifi keeps failing almost every day on almost the same time (19:00-21:00 in the evening). Changing the configuration to force the AP to get reconfigured hasn't helped. The only solution I found is to reboot the whole device.

The only thing I did in the past was the firmware updates, so I blame Sophos for it. Has anyone noticed problems with one of the latest firmwares and the internal WiFi?

If necessary I can provide my logs.

 

Any help would be greatly appreciated.

Dino



This thread was automatically locked due to age.
Parents
  • I just found these lines in my log:

    2017:03:26-20:24:56 92 hostapd: handle_probe_req: send failed
    2017:03:26-20:24:56 92 hostapd: handle_probe_req: send failed
    2017:03:26-20:24:56 92 hostapd: handle_probe_req: send failed
    2017:03:26-20:24:56 92 hostapd: handle_probe_req: send failed
    2017:03:26-20:24:56 92 hostapd: handle_probe_req: send failed
    2017:03:26-20:24:56 92 hostapd: Using interface wifi3 with hwaddr 00:1a:8c:0a:53:03 and ssid "SSID1"
    2017:03:26-20:24:56 92 hostapd: Failed to create interface wifi1: -23 (Too many open files in system)
    2017:03:26-20:24:56 92 hostapd: Try to remove and re-create wifi1
    2017:03:26-20:24:57 92 hostapd: Using interface wifi1 with hwaddr 00:1a:8c:0a:87:01 and ssid "SSID2"
    2017:03:26-20:24:57 92 hostapd: Failed to create interface wifi2: -23 (Too many open files in system)
    2017:03:26-20:24:57 92 hostapd: Try to remove and re-create wifi2
    2017:03:26-20:24:57 92 hostapd: Using interface wifi2 with hwaddr 00:1a:8c:0a:7a:02 and ssid "SSID3"
    2017:03:26-20:24:57 92 hostapd: Failed to create interface wifi4: -23 (Too many open files in system)
    2017:03:26-20:24:57 92 hostapd: Try to remove and re-create wifi4
    2017:03:26-20:24:58 92 hostapd: Using interface wifi4 with hwaddr 00:1a:8c:0a:e6:04 and ssid "SSID4"
    2017:03:26-20:24:58 92 hostapd: wifi3: interface state HT_SCAN->ENABLED

    (I changed the SSID names)


    After these, the WiFi won't work until a reboot.



Reply
  • I just found these lines in my log:

    2017:03:26-20:24:56 92 hostapd: handle_probe_req: send failed
    2017:03:26-20:24:56 92 hostapd: handle_probe_req: send failed
    2017:03:26-20:24:56 92 hostapd: handle_probe_req: send failed
    2017:03:26-20:24:56 92 hostapd: handle_probe_req: send failed
    2017:03:26-20:24:56 92 hostapd: handle_probe_req: send failed
    2017:03:26-20:24:56 92 hostapd: Using interface wifi3 with hwaddr 00:1a:8c:0a:53:03 and ssid "SSID1"
    2017:03:26-20:24:56 92 hostapd: Failed to create interface wifi1: -23 (Too many open files in system)
    2017:03:26-20:24:56 92 hostapd: Try to remove and re-create wifi1
    2017:03:26-20:24:57 92 hostapd: Using interface wifi1 with hwaddr 00:1a:8c:0a:87:01 and ssid "SSID2"
    2017:03:26-20:24:57 92 hostapd: Failed to create interface wifi2: -23 (Too many open files in system)
    2017:03:26-20:24:57 92 hostapd: Try to remove and re-create wifi2
    2017:03:26-20:24:57 92 hostapd: Using interface wifi2 with hwaddr 00:1a:8c:0a:7a:02 and ssid "SSID3"
    2017:03:26-20:24:57 92 hostapd: Failed to create interface wifi4: -23 (Too many open files in system)
    2017:03:26-20:24:57 92 hostapd: Try to remove and re-create wifi4
    2017:03:26-20:24:58 92 hostapd: Using interface wifi4 with hwaddr 00:1a:8c:0a:e6:04 and ssid "SSID4"
    2017:03:26-20:24:58 92 hostapd: wifi3: interface state HT_SCAN->ENABLED

    (I changed the SSID names)


    After these, the WiFi won't work until a reboot.



Children
  • Dino, sometimes the Up2Date process mangles part of a configuration.  Try restoring the configuration backup made just before the last time you applied Up2Dates.  Any luck with that?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • The upgrade (Up2Date) to UTM 9.500-9 earlier this week (May 8, 2017) has completely broken WiFi on my SG-115w:

     

    In the Wireless Protection Logs, getting

    2017:05:09-23:57:32 sophos hostapd: Configuration file: /var/run/hostapd-phy0.conf
    2017:05:09-23:57:32 sophos hostapd: nl80211: 'nl80211' generic netlink not found
    2017:05:09-23:57:32 sophos hostapd: Failed to initialize driver 'nl80211'
    2017:05:09-23:57:32 sophos hostapd: hostapd_free_hapd_data: Interface wifi2 wasn't started
    2017:05:09-23:57:32 sophos hostapd: hostapd_free_hapd_data: Interface wifi1 wasn't started
    2017:05:09-23:57:32 sophos hostapd: hostapd_free_hapd_data: Interface wifi0 wasn't started

    In a shell, getting

    sophos:/root # iw list
    nl80211 not found.

    Anyone else experiencing similar issues? I'm still investigating, will post findings here.

  • Can you log a support ticket with Sophos? they need people to tell them issues so that it can make 9.5 better for everyone. Even if you don't have a valid support case I am sure they would be interested to help and see whats going on.

     

    Also, have you tried reinstalling the 9.4 iso and does it come back?

  • StealthyM said:

    Can you log a support ticket with Sophos? they need people to tell them issues so that it can make 9.5 better for everyone. Even if you don't have a valid support case I am sure they would be interested to help and see whats going on.

    That was my first thought, but as a Home User I don't have that option. On the support page, under Home Users it says

    Important: We currently do not provide phone or email support for our free products and tools.

    You can find online documentation and videos as well as support through Sophos Community

    Hence my post to this thread (which was pretty close so I didn't want to open a new one). You're right though, I should probably put a link to this issue on the 9.5 thread

    StealthyM said:
    Also, have you tried reinstalling the 9.4 iso and does it come back?

    Probably my second next step. First is trying to figure out the driver / module - it'd be ideal to move forward.

    Thanks for your reply StealthyM

     
  • Well they have now released the proper iso for 9.5. Perhaps try that?

  • Hi Dino,

    If restoring the configuration backup made just before you applied the Up2Date(s) didn't fix this, I would definitely get Sophos Support involved.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • StealthyM said:

    Well they have now released the proper iso for 9.5. Perhaps try that?

    I'm installing 9.5 from iso as we speak, I'm curious if it changes anything. I've got a 9.4 iso on stand-by, that's the next step. I'll update the thread with the results.

  • R V said:

     

    StealthyM

    Well they have now released the proper iso for 9.5. Perhaps try that?

     

    I can confirm now that 9.500-9 breaks WiFi on SG-115w with the error I've posted above (even after reimage from ISO)

    I had to reimage the 115w to 9.413-4 to get WiFi back.

     

    I'd be happy to report this to Sophos Support but I am a Home User and I haven't found  way to contact their support with this type of license.

     

    Thanks  for your help.

     

    ,

    I know your previous comment was addressed to OP but just to provide some info from my side:

    BAlfson said:

    Hi Dino,

    If restoring the configuration backup made just before you applied the Up2Date(s) didn't fix this, I would definitely get Sophos Support involved.

    Before reimaging I've tried restoring the backup just before Up2Date and it didn't fix the issue.

  • Had same issues and found in a German forum to add athk9 (my case) or athk10 to /etc/modules file and reboot unit....

    working fine now on 9.5...

  • Hi, Humberto - you've apparently been around for awhile, but welcome to the UTM Community!

    Thanks for sharing that!

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA