This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing over VPN issue

Hi,

I have the same Problem like in this Thread. But the Workaround posted there with a lower metric is not working for me:

https://community.sophos.com/products/unified-threat-management/f/management-networking-logging-and-reporting/95873/issue-modifying-static-route

 

Problem:

I had a static route to 192.168.128.0/17. The Route was to a VPN Gateway. Now, the VPN Tunnel is directly on the Sophos UTM with Multipath Rule (no strict Routing and bind tunnel to local Interface) and the static route is deleted. But in the Routing table from Sophos there is still the route to the old Gateway:

192.168.128.0/17 via 10.60.8.4 dev eth12  metric 5

The Network is set in the remote Network of the vpn Setting.

The VPN is working except for this IP-Network. I Setup the VPN with this Setting: Sophos UTM multiple S2S IPsec VPN mit Failover – Tutorial (DE)

 

I also tried to open a case on the myutm Portal. But that seems to be broken the last few days.



This thread was automatically locked due to age.