Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 14 replies
  • Subscribers 5 subscribers
  • Views 25855 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL Vpn public IP

phuongpham
Hi.
I'm trying to setup SSL vpn.
I can connect to the VPN from Android, iPhone, PC etc.
The problem is the public IP doesn't reflect the UTM public IP.
It means if I use 4G connection from my iPhone the public IP on the phone is still the same after connected to VPN. I would like to have same public IP on the phone as define on UTM.

Some ideas?


This thread was automatically locked due to age.
Parents
  • 0
    What is assigned in our local networks in the advanced tab under ssl vpn?  If you want all of your traffic on your device (not tethered, it is typically not included), then you should have any in your local networks definition.  That would remove the split tunneling setting.
  • +1 in reply to darrellr_01

    Actually it's safer not to use "any" but use "Internet (IPv4)" instead, unless you specifically want all potential networks reachable by the UTM to be accessible.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • +1 in reply to darrellr_01

    Actually it's safer not to use "any" but use "Internet (IPv4)" instead, unless you specifically want all potential networks reachable by the UTM to be accessible.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data
Unfiltered HTML