Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 38 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 107091 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site-to-Site VPN to Windows Azure

dsidler
Hi all

Wondering if anyone successfully created a site-to-site VPN to Azure's new Virtual Network. 

Tried several options based on the Cisco and Juniper configs provided by MSFT, but to no avail. Usually stuck with a "no connection has been authorized with policy=PSK" message.

Running 8.3 on a UTM-120. 

Cheers,
Dan


This thread was automatically locked due to age.
Parents
  • 0
    hello, i have the same problem.

    these are my policy settings:

    2012:07:03-11:03:38 asg-2 pluto[8702]: packet from 168.63.13.46:1024: received Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008]
    2012:07:03-11:03:38 asg-2 pluto[8702]: packet from 168.63.13.46:1024: received Vendor ID payload [RFC 3947]
    2012:07:03-11:03:38 asg-2 pluto[8702]: packet from 168.63.13.46:1024: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
    2012:07:03-11:03:38 asg-2 pluto[8702]: packet from 168.63.13.46:1024: ignoring Vendor ID payload [FRAGMENTATION]
    2012:07:03-11:03:38 asg-2 pluto[8702]: packet from 168.63.13.46:1024: ignoring Vendor ID payload [MS-Negotiation Discovery Capable]
    2012:07:03-11:03:38 asg-2 pluto[8702]: packet from 168.63.13.46:1024: ignoring Vendor ID payload [Vid-Initial-Contact]
    2012:07:03-11:03:38 asg-2 pluto[8702]: packet from 168.63.13.46:1024: ignoring Vendor ID payload [IKE CGA version 1]
    2012:07:03-11:03:38 asg-2 pluto[8702]: packet from 168.63.13.46:1024: initial Main Mode message received on 194.208.34.253:500 but no connection has been authorized with policy=PSK 


    policy settings:

    Policy_Azure
    Compression off, not using strict policy.
    IKE Settings: AES 128 / SHA1 / Group 2: MODP 1024   Lifetime: 28800 seconds
    IPSec Settings: AES 128 / SHA1 / Null (None)   Lifetime: 3600 seconds

    any ideas?
  • 0 in reply to sebastian.mair
    Has anyone had any success with this?  I am attempting to set this up without any luck.
Reply Children
No Data
Unfiltered HTML