Hi gyus,
not sure if that’s possible but hope you can help me.
We have a SG210 with current firmware installed
Eth1 (LAN Interface) 192.168.0.1
When this port is connected to the lan switch the Users should be allowed to use http/https
When Eth1 is disconnected and Eth2 (192.168.0.2) is connected to the LAN switch then http/https should be blocked.
Eth1 and Eth2 will never be connected to the LAN (switch) at the same time. It’s either Eth1 OR Eth2.
Is that even possible?
Thanks and greetings
This thread was automatically locked due to age.