Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 5 subscribers
  • Views 14140 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Info-109 DHCP Client not running - restarted

Simon A

Since the last update my UTM periodically loses it's IP address for the wan adapter (get the IP address directly from the internet provider). In web admin the interface is shown as down and I have to click on renew.



This thread was automatically locked due to age.
Parents
  • 0

    I know this thread is old, but I have had the same problem on my home UTM for some time. I am not sure which update started it. It happens several times a week.

  • 0 in reply to utmadm

    Bump. It is still happening on my home UTM (virtual machine) but not a hardware UTM. I get an email message from the home UTM saying DHCP Client not running - restarted. 

  • 0 in reply to utmadm

    Are you saying that you tried #7.7 and that didn't help?  If using ESXi, change the NIC to VMXNET3.  What if you use a real NIC instead of a virtual NIC? (Sorry, I don't do much VM, so I'm certain I'm not using the correct terminology.)

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0 in reply to utmadm

    Are you saying that you tried #7.7 and that didn't help?  If using ESXi, change the NIC to VMXNET3.  What if you use a real NIC instead of a virtual NIC? (Sorry, I don't do much VM, so I'm certain I'm not using the correct terminology.)

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML