Intel I219 support

I may be wrong but I think the driver have to be integrated in the linux kernel? If yes then it may take some time, until UTM or SF-OS is running on a kernel which is new enough to support the I219.
I ran with my home appliance into the same problem and some research showed that Intel classified the I219 as a consumer NIC. Therefore I don't think Sophos will try to add support for the I219. Only option would be to wait for a kernel which got support for the I219.

But that's only my opinion - I (hope I) could be wrong.

Edit says: at my home appliance I use now an old Intel dual port NIC. Got it cheap from ebay, about $20.

The I219 NIC is supported fully since kernel 3.19.x. In some cases it is possible to use drivers to get it working even in 2.6 kernels. Here is more info:

http://cateee.net/lkddb/web-lkddb/E1000E.html

It would be really great if Sophos could finally say something about this (there are other threads here and in XG community about this already). The I219 is very common these days, it's basically on every board that has Intels x170 chipset (for Skylake). 

It is very easy to get Linux to recognize the NIC. 

The nic in question is supported in at least 9.4 of the utm and 9.35x both of which use a 3.12x kernel..:)

Unfortunately, it is still not supported in XG though.

Do I have to do something special for the UTM to recognize the i219 NIC?

At home my mainboard have onboard i219 and i211. The i211 is working fine but the i219 is still not recognized after upgrading to 9.407-2. A reboot didn't help.

nopers you just have to wait for the kernel in XG to have the proper intel drivers in it...stick with i211 for now the i219 might show up...but the appliances use i211 which is why they have support now.

If those uber-secretive Sophos engineer would actually put this in the release notes, one could wait. Because we would be notified. The only option to find out right now would be to install each and every release when it comes out, just to find out the kernel still wasn't updated. You know what? I switched to Fortinet. They deserve my money.

That's your decision.  Sophos is under no obligation to support hardware that they do not put out.  Any other hardware support is just by happenstance.  ALL security vendors do this.  they all use a reduced driver set that is tuned for their products.  it is good security...and good business.

William Warren said:

That's your decision.  Sophos is under no obligation to support hardware that they do not put out.  Any other hardware support is just by happenstance.  ALL security vendors do this.  they all use a reduced driver set that is tuned for their products.  it is good security...and good business.

I don't dispute that and I agree. My criticism is not about them not putting in the drivers that I need, my criticism is about the fact that they don't put any hardware information in the release notes. That's just not acceptable *at all*, given the circumstance that they are selling XG not just on an appliance but also as a software to run on baremetal. Keeping customers in the dark is completely and utterly unprofessional. 

Hardware Compatibility list pdf

Cheers - Bob