This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Install Sophos UTM 9 in server Dell PowerEdge R640 with PERC H740P

Im installing via DVD ASG 9.504 in a new server Dell Power Edge R440 - 2 HD 300Gb, 16 Gb RAM. PERC H740P

Initially, the Dell IDRAC Software (Lifecycle Controller) guide me to create a Virtual Disk with the 2 HD (RAID 1). RAID completes. then The Dell software gives the option to install the operating system or jump directly to install the OS. In both the server reboot and start with de DVD (wich contains Sophos) and the installation begins.

Select - Start

The sophos tried to detect the devices but do not detect HD, logically when continue with installation, an error appears.

Dell support tell me that the problems is with the PERC NIC ( PERC H740P), and said that is incompatible with sophos.

Is there any astaro driver that can be loaded in the installation?

Thanks

This thread was automatically locked due to age.

Parents

0 BAlfson over 6 years ago

Hola Christian and welcome to the UTM Community!

The developers of the UTM must test every new piece of hardware and vet the driver. It's not uncommon for newer devices to be incompatible with the older, tested drivers that the UTM installer can load.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 6 years ago

Hola Christian and welcome to the UTM Community!

The developers of the UTM must test every new piece of hardware and vet the driver. It's not uncommon for newer devices to be incompatible with the older, tested drivers that the UTM installer can load.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data