Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 3 subscribers
  • Views 6641 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos Enterprise Console management application failing to run

jimmyluciano

Hello,


Recently I performed an migration and upgrade the Sophos Enterprise Console and it has been running smoothly ever since. However, previously I had the Enterprise Console management application installed on my workstation, so that I didn't have to connect the Sophos server to see the current stats. With that said,  I had to upgrade this application on my workstation and now every time I try to run it, I receive the  below error and nothing more:

I am missing something here? I believe I'm running the correct installer viewing stats from a workstation. I ran the "Sophos Enterprise Console" installer. I believe I had a VIP support ticket for this in the past  but I was never able to get this resolved :( ....Any help is appreciated.



This thread was automatically locked due to age.
Parents
  • 0

    Hello jimmy luciano,

    this picture falls short of the familiar adage by 996 words (factoring in the window title) [;)] ... It's the Management server connection failed window - it's also blank on my Windows 7 (as well as an XP I've kept for reference) but works on 2008R2 and seems to be a problem with the latest version. 

    The console (5.4.0?) works on your server and fails only on your workstation? This would leave connectivity issues - network cable unplugged or server not found/reachable rather unlikely - with a firewall on the workstation as primary suspect. This happened after the upgrade to 5.4.0 (and previously is the last week)?

    Christian

  • 0 in reply to QC

    Hi,

    The first thing (other than ensuring the same versions are being used) I would check is where the console is pointing and how it is resolving the management server.

    HKEY_LOCAL_MACHINE\SOFTWARE\Sophos\EE\Management Tools

    ServerLocation.

    This could be IP/NetBIOS/FQDN, as long as it resolves to the management server.

    The next thing would be to check, the entries in: EnterpriseConsole.exe.config. Same directory as the exe of the same name. 

    Are the addresses in there resolvable? E.g.

    <client>
    <endpoint binding="ws2007HttpBinding" bindingConfiguration="WS2007HttpBinding_IAdminConsole_Configuration" contract="Sophos.Patch.ServerCommunicator.IAdminConsole" name="WS2007HttpBinding_IAdminConsole" address="WIN-CHJ3RV7TFCK:80/.../ServerCommunicator">

    </endpoint>

    <endpoint behaviorConfiguration="WS2007HttpBinding_IWebControlFrontEndService_Behavior" binding="ws2007HttpBinding" bindingConfiguration="WS2007HttpBinding_IWebControlFrontEndService_Configuration" contract="Sophos.WebControl.FrontEnd.IWebControlFrontEndService" name="WS2007HttpBinding_IWebControlFrontEndService" address="WIN-CHJ3RV7TFCK:80/.../WebControlFrontEndService">

    </endpoint>

    <endpoint behaviorConfiguration="WS2007HttpBinding_IEncryptionFEService_Behavior" binding="ws2007HttpBinding" bindingConfiguration="WS2007HttpBinding_IEncryptionFEService_Configuration" contract="Sophos.Encryption.FrontEnd.Interfaces.IEncryptionFEServiceAsync" name="WS2007HttpBinding_IEncryptionFEService" address="WIN-CHJ3RV7TFCK:80/.../EncryptionFrontEnd">

    </endpoint>

    <endpoint binding="ws2007HttpBinding" bindingConfiguration="WS2007HttpBinding_IIdentityService_Configuration" contract="Sophos.Management.Identity.Interfaces.IWSTrust" name="WS2007HttpBinding_IIdentityService" address="WIN-CHJ3RV7TFCK:80/.../WSTrustService">

    </endpoint>

    <endpoint binding="ws2007HttpBinding" bindingConfiguration="WS2007HttpBinding_IAuditingService_Configuration" contract="Sophos.Management.Auditing.FrontEndService.Interfaces.IAuditingService" name="WS2007HttpBinding_IAuditingService" address="WIN-CHJ3RV7TFCK:80/.../AuditingService">

    </endpoint>
    </client>

    So the communication from the remote console to the management server is over DCOM and HTTP. Ensure any necessary firewall rules are in place.

    Regards,

    Jak

Reply
  • 0 in reply to QC

    Hi,

    The first thing (other than ensuring the same versions are being used) I would check is where the console is pointing and how it is resolving the management server.

    HKEY_LOCAL_MACHINE\SOFTWARE\Sophos\EE\Management Tools

    ServerLocation.

    This could be IP/NetBIOS/FQDN, as long as it resolves to the management server.

    The next thing would be to check, the entries in: EnterpriseConsole.exe.config. Same directory as the exe of the same name. 

    Are the addresses in there resolvable? E.g.

    <client>
    <endpoint binding="ws2007HttpBinding" bindingConfiguration="WS2007HttpBinding_IAdminConsole_Configuration" contract="Sophos.Patch.ServerCommunicator.IAdminConsole" name="WS2007HttpBinding_IAdminConsole" address="WIN-CHJ3RV7TFCK:80/.../ServerCommunicator">

    </endpoint>

    <endpoint behaviorConfiguration="WS2007HttpBinding_IWebControlFrontEndService_Behavior" binding="ws2007HttpBinding" bindingConfiguration="WS2007HttpBinding_IWebControlFrontEndService_Configuration" contract="Sophos.WebControl.FrontEnd.IWebControlFrontEndService" name="WS2007HttpBinding_IWebControlFrontEndService" address="WIN-CHJ3RV7TFCK:80/.../WebControlFrontEndService">

    </endpoint>

    <endpoint behaviorConfiguration="WS2007HttpBinding_IEncryptionFEService_Behavior" binding="ws2007HttpBinding" bindingConfiguration="WS2007HttpBinding_IEncryptionFEService_Configuration" contract="Sophos.Encryption.FrontEnd.Interfaces.IEncryptionFEServiceAsync" name="WS2007HttpBinding_IEncryptionFEService" address="WIN-CHJ3RV7TFCK:80/.../EncryptionFrontEnd">

    </endpoint>

    <endpoint binding="ws2007HttpBinding" bindingConfiguration="WS2007HttpBinding_IIdentityService_Configuration" contract="Sophos.Management.Identity.Interfaces.IWSTrust" name="WS2007HttpBinding_IIdentityService" address="WIN-CHJ3RV7TFCK:80/.../WSTrustService">

    </endpoint>

    <endpoint binding="ws2007HttpBinding" bindingConfiguration="WS2007HttpBinding_IAuditingService_Configuration" contract="Sophos.Management.Auditing.FrontEndService.Interfaces.IAuditingService" name="WS2007HttpBinding_IAuditingService" address="WIN-CHJ3RV7TFCK:80/.../AuditingService">

    </endpoint>
    </client>

    So the communication from the remote console to the management server is over DCOM and HTTP. Ensure any necessary firewall rules are in place.

    Regards,

    Jak

Children
  • 0 in reply to jak

    Thanks for the guidance, your troubleshooting notes led me to the Windows server firewall where I needed to make some changes. After the changes were made I then found I was using the wrong version of the console on my workstation. Which lead to download the correct version and installing. But now everything works perfectly, thanks for your assistance.

Unfiltered HTML