Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 7 subscribers
  • Views 4946 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Policy Deployment

narayan khanal

I got a popup msg as "Policy Deployment is currently disable" Safeguard Mgnt Center. Can some1 guide me how to enable it and also explain what is the implication  of having that turned ON or OFF



This thread was automatically locked due to age.
  • 0

    Hello ,

     

    Policy Deployment can be On/Off if you press F3 key on the Safeguard Management Center. But Policy Deployment automatically becomes disabled if you have exceeded your SGN features license usage which can be seen if you selecr Root>Licenses tab.

     

    If this is the case you will need to locate or identify the computer that have installed those SGN features that you are not license with. You will noticed if you view the license tab that there is an X mark on the feature that was been overused. Once you identify the computer/s you will need to uninstall the following feature by going into appwiz.cpl and select Sophos Safeguard Client and select change. Then disable the said SGN feature that was been installed. You may use this article as a guide if you are using SGN 8 community.sophos.com/.../124992

Unfiltered HTML