This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Windows 10 (18.03) and SafeGuard Client 8.00.5.16

Hello there,

does anyone have Problems with the new Windows 10 and Safe Guard Client.

I have one Client with the newest Version of Windows 10 (18.03) after Login appears a Blue Screen.

 

Is here someone with equal problems?

 

Kind regards

Patrick



This thread was automatically locked due to age.
Parents
  •  Hello Patrick  

       We had the same issue you are referring to only on  Pentium workstations with SG 7 after the 1803 upgrade.  The BSOD will happen at domain user login if the network cable was plugged in.   Re-installing W10 produced the same issue.  

      After a few troubleshooting  procedures, what worked for us was to login as a local admin on the updated machine,  unistall SG 7, reboot, install SG 8, reboot again and so far our computers are working normally.   Like I said before, this issue only occurred on Pentium workstations. Others with different CPU's had no issues and upgraded successfully. 

Reply
  •  Hello Patrick  

       We had the same issue you are referring to only on  Pentium workstations with SG 7 after the 1803 upgrade.  The BSOD will happen at domain user login if the network cable was plugged in.   Re-installing W10 produced the same issue.  

      After a few troubleshooting  procedures, what worked for us was to login as a local admin on the updated machine,  unistall SG 7, reboot, install SG 8, reboot again and so far our computers are working normally.   Like I said before, this issue only occurred on Pentium workstations. Others with different CPU's had no issues and upgraded successfully. 

Children
No Data