This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Static Route On Cyberoam CR50iNG

Hello

I have a Cyberoam CR50ing Connected through Lan ( Lan1) to a Cisco Router and the Cisco Router has a VPN connection to another LAN ( Lan2). I have made a static route with the below information:

Destination : 10.2.5.0./24 (Lan2)

Gateway: 10.4.0.24 ( Ip address of the Cisco router interface)

Interface: Port A.10 - 10.4.0.1 (Cyberoam subinterface)

Distance:0

Now am able to ping devices on Lan 2 ( like 10.2.5.25) from Cyberoam and also able to traceroute it. On the other hand devices on Lan 2 are able to ping the Cyberoam Interface 10.4.0.1. But am not able to ping Lan2 from any device on Lan 1.

Can you please help me?

This thread was automatically locked due to age.