Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 37 subscribers
  • Views 1248 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Force SSL-VPN Remote Users to Use a Specific WAN Link

Baldwin Quibuyen

Hello Everyone:

Need your assistance.  Is this even possible?

WAN1 = 100Mb/100Mb with static Public IP Address

WAN2 =  50Mb/50Mb with static Public IP Address

How will we setup the following?

- WAN1 to be dedicated for SSL-VPN remote users.  Travelling users that connect back to the network using Sophos SSL-VPN Client.

- WAN2 dedicated for internal office users Internet browsing.

Thank you for any insight.



This thread was automatically locked due to age.
  • FormerMember
    +1 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    You could override the hostname with the WAN1 link under VPN > VPN settings > SSL VPN. Once you make this change,  the SSL VPN configuration only includes the WAN1 link; all the SSL VPN remote users will only connect to this link. 

    For the internal user's internet access, you can specify the WAN2 in the SNAT rule.  

    Thanks,

Unfiltered HTML