I am having Sophos XG v18 Refresh-1 Installed as a ISO file in VMware Fusion 10.1.6 in which I am trying to enable fastpath but getting below error.
console> system firewall-acceleration show Firewall Acceleration is Enabled. Fastpath Load Failed.console> system firewall-acceleration
Device informationAppliance Model: SFVUNLFirmware Version: SFOS 18.0.0 EAP3-Refresh1Firmware Build: 279Firmware Loader version:HW version: SO01
I've came across same kind of error starting from EAP-1 till EAP-3 refresh.I have also tried to re-install again but still it was same.
I can see that VFP module is also not loaded due to the fact that fastpath is not been loaded.SFVUNL_SO01_SFOS 18.0.0 EAP3-Refresh1# lsmod | grep vfpI am not sure what needs to be done next, can someone please help me out?
Stuart, I have managed to resolved it by changing the driver as per belowethernet1.virtualDev = "e1000"ethernet2.virtualDev = "e1000"
Thanks for all your help
Glad you got it working.
One thing to note: vmxnet3 is an actual vmware network driver whereas e1000 is actually emulating the Intel card. vmxnet3 therefore will have much better performance than the e1000
I dont understand why this didnt work for you, vmxnet3 has been in Fusion for a looooong time. Maybe it might be worth investigating upgrading to Fusion 11, but as I say it should just work.