I'm having an issue getting the Site-To-Site Red working. I have it all setup and it shows connected but I can't access the remote network. I can ping the remote gateway but nothing past that. Below are my settings for the Red Server....
RED IP: 192.168.a.1
RED netmask: /24(255.255.255.0)
Zone: LAN
No Tunnel Compression
RED MTU: 1500
Static Routes on Red Server:
Destination IP / Netmask: 192.168.b.0/24 - Remote Network
Gateway: 192.168.a.2
Interface: 192.168.a.1
Red Client Setup:
RED IP: 192.168.a.2
RED netmask: /24(255.255.255.0)
Zone: LAN
RED MTU: 1500
Static Routes on Red Server:
Destination IP / Netmask: 192.168.d.0/24 - Remote Network
Gateway: 192.168.a.1
Interface: 192.168.a.2
I have setup a firewall rule on both sides like below....
LAN,RED>ANY LAN,RED>ANY Any Service
No matter what I've tried and can't access the remote network either way. I can only ping the gateway from each side.
This thread was automatically locked due to age.