This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion
  • you know, you can upload it manually?

    get it from my sophos portal

  • I do know, but in the portal I just see the MR2

  • What the...I've completely missed it, where did you find it?


  • in my download portal.

    but not at first sight. you need to enter your serial number and then click the search button - not just hit enter.

    Then a new frame at the bottom appears, with circling Sophos logo and finally shows you a DL link.

    Sorry, I misunderstood your first question as when it will be available on the XG but you mentioned you do not see it in the portal.

  • Only this in log:

    2022-03-29.17:30:35 MESSAGE [Main] [ precompile.cpp:687] [Precompile thread]: Signatures are out of sync. Fetching new signatures.
    2022-03-29.17:30:36 MESSAGE [Main] [ precompile.cpp:580] Downloaded file /sdisk/sasi/asdb.tmp is verified with checksum..
    2022-03-29.17:30:37 MESSAGE [Main] [ engine.cpp:790] Database loaded of version: 2022.3.29.150919
    2022-03-29.17:30:37 MESSAGE [Main] [ precompile.cpp:701] [Precompile thread]: New signatures are fetched and successfully loaded.
    2022-03-29.17:54:38 MESSAGE [Main] [ precompile.cpp:580] Downloaded file /sdisk/sasi/ is verified with checksum..
    2022-03-29.17:54:39 MESSAGE [Main] [ engine.cpp:790] Database loaded of version: 2022.3.29.152718
    2022-03-29.17:54:39 MESSAGE [Main] [ precompile.cpp:758] [Precompile thread]: Signatures are reloaded with latest delta and verified with checksum of new signatures.
    2022-03-29.18:10:49 MESSAGE [Main] [ main.cpp:78] LASE Daemon STARTED
    2022-03-29.18:10:49 MESSAGE [Main] [ main.cpp:80] LASE Daemon Version: 4.1.4
    2022-03-29.18:10:50 MESSAGE [Main] [ laseserver.cpp:372] Lased started on port : 25315

    CPU Has at least SSSE3:

    SFVH_SO01_SFOS 18.5.3 MR-3-Build408# grep flags -m1 /proc/cpuinfo
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm cpuid_fault epb invpcid_single pti tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt ibpb ibrs stibp dtherm ida arat pln pts

    Bart van der Horst

    Sophos XG v18(.5) / v19 Certified Architect

  • Does this update resolve the issue in 18.5.2 where the password from one PPPoE connection overwrites all the PPPoE password in all the other connections? There is nothing in the list of fixes, but also nothing in the list of known issues.

  • Hi Toni, Spam is getting out of hand, a few mail are getting labeled as [SPAM] but a lot of 100% spam is getting through, I'm getting complains about this. Scrolling through the e-mail logs i see lots of spam mails that just getting approved.

    What's going on, this needs to be fixed. I already stopped the roll-out to our customers.


    Bart van der Horst

    Sophos XG v18(.5) / v19 Certified Architect

  • Do you have a Support Case for this? 


  • This issue was a one time issue in MR2. So if you had this issue, it should not come back by upgrading to MR3. 

    It could potentially come up, if you upgrade from MR1 to MR3 (skipping MR2). This will be fixed in MR4.