Hi all,
Creating a port forward or dnat rule to the firewall ip
Is is best to port forward to the lan int ip or the wan int ip
Thanks,
Rob
This thread was automatically locked due to age.
Hi all,
Creating a port forward or dnat rule to the firewall ip
Is is best to port forward to the lan int ip or the wan int ip
Thanks,
Rob
Hi,
there probably is using ACL, but please remember that the traffic hits the firewall external interface before being passed to firewall rules.
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.
Hi Sophos User1175,
Just adding to what rfcat_vk said,
Refer to the article below to know more information on 'local service ACL exception rule'
Hi,
a suggestion you might like to think about and maybe even experiment with.
You setup an incoming firewall rule with a dnat.
the trick being to set a range incoming that the address and port translation point at the internal interface of the XG. So that way you don’t need to provide wan access to the XG.
ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.