Dream Machine and Sophos CS210

Question

I have a dream machine managing ubiquiti aps, is there a certain port configuration on the Sophos CS210 to allow the ubiquiti ac pro 6 aps to handle ssids with different vlans?

PhilippRusch · Accepted Answer

You have one untagged VLAN, this should be the native management VLAN1 assigned to that port. 
 Then you assign the other VLANs as tagged to the same port, so let's say you use 10,20,30,40,50 and 60 as tagged VLAN ID for your 6 APs. 
 That's it.

PhilippRusch · Answer

Hello Ken, 
 you are using 6 different VLANs to seperate traffic. Then you need either 6 DHCP servers running on each "VLAN interface" of your dream machine or you need a DHCP relay running on the switch. I can help you with the latter: 
 In the switch configuration GUI goto to "Configure/L3 protocol/DHCP relay" turn the global setting on and define the IP address of your dream machine, if this is DHCP-server for the 6 LAN segments.

Dream Machine and Sophos CS210

Top Replies