Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 43 subscribers
  • Views 7276 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos RED 50 - Boots up and shows only ">Live-Log"

Rumak18

Hi folks,

 

i need some troubleshooting help. We were using a sophos red 50 with SG430. The red devie starts up and and the link connection blinks. After some time all the link leds disappear for some seconds just to appear again. The red device does not get a connection anymore and the displays shows "->Live-Log" but none of the buttons below sem to have a function.

Can anyone help to troubleshoot? Is there a way to connect to the device directly?



This thread was automatically locked due to age.
Parents
  • 0

    Save yourself the trouble of trying to troubleshoot this issue. Call Sophos support, or your partner and have them do it.  You will need to RMA this device ASAP.  We had a similar issue with a client where their RED50 had been working, another agency disconnected power to the modem it was connected to, RED was down for 4 hours, when power and modem connectivity re-established the RED50 was in the "Live-Log" only no matter what we did, reboots, flash, terminal resets, nothing worked.  We RMA'd and the replacement RED50 came up without issue.

    In response to those who have RED50 in the box as a "spare" in the event of a failure, this same situation revealed our spare RED50 that had not been connected since we put the UTMs in palce 3.5 years ago, would not update either, not out of a RED issue, but the hardware itself just wasn't operating properly.

    My advice is if you buy multiple RED50 device and plan on keeping them as spares, add to your maintenance schedule to quarterly grab the RED50 out of the closet, plug it in and provision it in the UTM, no need to assign a LAN to it, just provision the unit, its very quick and easy and ensures your hardware is on the correct firmware, because you could end up with a RED that 15+ firmwares behind when you try to use it years later.

    But do not waste time troubleshooting a RED, if a restart didn't correct your issue, RMA that thing and Sophos is really good about replacing the hardware quickly.

Reply
  • 0

    Save yourself the trouble of trying to troubleshoot this issue. Call Sophos support, or your partner and have them do it.  You will need to RMA this device ASAP.  We had a similar issue with a client where their RED50 had been working, another agency disconnected power to the modem it was connected to, RED was down for 4 hours, when power and modem connectivity re-established the RED50 was in the "Live-Log" only no matter what we did, reboots, flash, terminal resets, nothing worked.  We RMA'd and the replacement RED50 came up without issue.

    In response to those who have RED50 in the box as a "spare" in the event of a failure, this same situation revealed our spare RED50 that had not been connected since we put the UTMs in palce 3.5 years ago, would not update either, not out of a RED issue, but the hardware itself just wasn't operating properly.

    My advice is if you buy multiple RED50 device and plan on keeping them as spares, add to your maintenance schedule to quarterly grab the RED50 out of the closet, plug it in and provision it in the UTM, no need to assign a LAN to it, just provision the unit, its very quick and easy and ensures your hardware is on the correct firmware, because you could end up with a RED that 15+ firmwares behind when you try to use it years later.

    But do not waste time troubleshooting a RED, if a restart didn't correct your issue, RMA that thing and Sophos is really good about replacing the hardware quickly.

Children
No Data
Unfiltered HTML