Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 4 subscribers
  • Views 4165 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos Endpoint on Fedora 27/28 Mount errors after update

MikeEccy

SAV: 9.15.0, Engine: 3.72.1, Data: 5.55

I have recently carried out a savupdate on a Fedora 28 kernel Linux 4.18.12-200.fc28.x86_64.

The installer then compiled a local Talpa Binary pack apparently successfully.

The scanner appeared to be operational in ‘ps’ with the processes running correctly.

When I tried to mount a drive the following error occurred.

mount(2) system call failed: Bad address.

The automatic updating of the system was also affected with the following error

Failed to mount per-user tmpfs directory /run/user/0: Bad address

The Pulse Audio detection of the sound card also was not discovered.

I turned off the scanner with the command

./savdctl disable

and the problem was resolved.

I have also issued the command ./savdctl disableOnBoot savd

Any suggestions or should I just enable ‘fanotify’ ?



This thread was automatically locked due to age.
Parents
  • 0

    Hello MikeEccy,

    carried out a savupdate
    you have automatic updates disabled? There hasn't been a significant update to the software in the last months AFAIK. You did not update Fedora or the kernel, did you?

    Perhaps has a suggestion.

    Christian

  • 0 in reply to QC

    Hi Christian,

    Autoupdate was turned on but not working.

    In truth sometime back I installed Sophos Linux Endpoint on my home machine to test it for my main Centos 6 workserver.

    I purchased a commercial license for the work server and it uses the pre-compiled Talpa binary packs without issue.

    I posted this message as I found the errors were bizarre and it may help someone at some later date.

    Douglas Leeder's suggestion corrects the problem on my home machine.

    Thanks for your help.

    Mike

     

     

     

Reply
  • 0 in reply to QC

    Hi Christian,

    Autoupdate was turned on but not working.

    In truth sometime back I installed Sophos Linux Endpoint on my home machine to test it for my main Centos 6 workserver.

    I purchased a commercial license for the work server and it uses the pre-compiled Talpa binary packs without issue.

    I posted this message as I found the errors were bizarre and it may help someone at some later date.

    Douglas Leeder's suggestion corrects the problem on my home machine.

    Thanks for your help.

    Mike

     

     

     

Children
No Data
Unfiltered HTML