Data Control and DLP
Endpoint Security and Control
Sophos UTM 9
Web Server Protection
Sophos Firewall Manager
Sophos iView V2
Tweets by SophosSupport
APs intermittently rebooting due to inadequate power supply from the PoE switch
Created: 8 Jan 2020
Sophos AP does not perform Layer 2 classification and LLDP Support for Power Negotiations. Either pre-802.3at mode or fixing the power to 30W should be configured on third party switch to have consistent power supply to AP via POE.
Sophos XG Firewall: How to configure SSO for APX WiFi users authenticated via Radius server
Created: 24 May 2019
This article describes the steps to configure Single Sign On (SSO) for APX wireless users already authenticated via Radius server.
APX 530 / APX 740 ETH1 Interface FAQ
Created: 29 Nov 2018
This article provides information regarding APX 530 / APX 740 ETH1 interface.
Sophos XG Firewall: How to bridge a wireless network to a VLAN
Created: 12 Apr 2018
This article describes the steps on how to bridge a wireless network to a VLAN.
Sophos XG Firewall: How to deploy and manage access point over IPSec tunnel from head office
Created: 14 Nov 2016
This article describes the steps to deploy an access point (AP) at the branch office and register and manage the AP in a head office appliance that is connected over an IPSec tunnel.
Sophos XG Firewall: How to configure a wireless network
Created: 23 Sep 2016
This article covers enabling wireless protection, adding a wireless network and adding an AP on a Sophos Firewall.
Sophos XG Firewall: How to reduce URL redirection time after logging in to a hotspot
Created: 9 May 2016
This article describes how to reduce the time taken to redirect to a URL after logging in to a hotspot.
Sophos XG Firewall: How to fix issues with Radius authentication used for wireless protection
Created: 8 Oct 2015
This article explains how to fix issues with Radius authentication used for wireless protection when the Radius server is connected via an IPsec tunnel.
Sophos XG Firewall: Configuring a Sophos Access Point behind a RED device in split mode
Created: 7 Oct 2015
This article provides instructions on how to configure Sophos Access Points behind RED devices that are in standard or transparent split mode.
Sophos XG Firewall: Wireless clients fail to obtain an IP address from Windows DHCP server
Created: 7 Oct 2015
Wireless clients fail to obtain an IP address from Windows DHCP server.